Nova-X UHS Star-Shine
Franklin CleaningTechnology has developed Nova® X to provide extraordinary star-like gloss. Nova® X combines in one product our highest initial gloss with our highest burnished gloss. Nova® X is primarily designed for daily or frequently burnished high traffic floors in grocery stores, retail locations, health care and industrial applications.
F465222 – 4/1 gal.
F465226 – 1/5 pail
F465238 – 1/55 drum
Product Downloads
For use on vinyl composition, vinyl, asphalt, sealed concrete, terrazzo and sealed wood.
pH – 8.5 ± 0.5
Appearance – Off White Emulsion
Fragrance – Polymeric
Freezing Point – About 32°F
% Total Solids – 25.5
% Non-Volatile – 20.5
Boiling Point – 212°F
Solubility in Water – Dispersible
Flash Point – None
Coverage – 1800 to 2200 sq. ft. per gallon (may vary due to differences in porosity of the surface)
INITIAL APPLICATION
- REMOVE old sealer/finish using an appropriate Franklin stripper and following label directions.
- APPLY a coat of Nova® X using a clean mop.
- DRY: Allow 20 minutes drying time.
- APPLY 4 coats. For best results allow adequate drying time between each coat.
- BURNISH: Optional burnishing after last coat-wait 1 hour.
MAINTENANCE
- DUST MOP the floor. Remove gum, labels, and other attached soil deposits with a long-handled scraper or putty knife.
- DAMP MOP OR AUTOSCRUB using Franklin UHS Combo Cleaner/Maintainer and following the label directions.
- BURNISH the floor after cleaning with an ultra high speed or high speed machine using the appropriate pad. If the floor begins to look worn, an occasional scrub & re-coat will decrease the need for frequent stripping.
Water – 7732-18-5
Acrylic copolymer – Mixture
Diethylene glycol monoethyl ether – 111-90-0
Tri-butoxyethyl phosphate – 78-51-3
Dipropylene glycol monoethyl ether – 34590-94-8
